Skip to content
Tile

Tile

Tile is still the most water-proof surface you can put in a Florida bathroom, shower or entry, and porcelain in particular stands up to sand, pool traffic and decades of mopping. We install new porcelain and ceramic floors, shower walls and feature walls, often in the same home where we are pulling up old, cracked tile from a previous owner. We bring tile samples to your home with the rest of the showroom, so you can see colour and size against your own cabinets and light before you commit.

Shower with blue herringbone tile wall and white subway tile
Why tile

The surface that does not mind water

What tile does better than anything else

Tile is fired clay. It does not swell, it does not care about humidity, and properly set porcelain will put up with sand from the beach, chlorine from the pool and mopping every day. In a Florida bathroom, shower or laundry room, that matters more than anything else on the spec sheet.

It also offers design range nothing else matches: wood-look porcelain planks, large-format stone looks, small mosaics, subway tile and patterned layouts like herringbone. A tiled shower wall or feature can become the focal point of a room.

Honest trade-offs

Tile is hard and cold underfoot, and it is unforgiving if you drop a glass. It also takes longer to install than a floating floor, because each tile is set in mortar and grouted. For large open living areas, many homeowners now choose luxury vinyl plank for comfort and speed and keep tile for bathrooms and showers. We help you decide room by room.

Where tile belongs

Rooms and surfaces we tile

Bathroom floors

A bathroom floor has to handle water every day. We recommend porcelain with a texture suited to wet feet, and we pay attention to slope around the tub and toilet so water does not pool.

Shower walls and surrounds

Showers are where pattern and detail show. Herringbone, stacked and offset subway layouts, accent bands and niches all need careful planning so cuts land evenly at corners and edges. We lay the pattern out before we set the first tile.

Entries and laundry rooms

The front door, the garage entry and the laundry room take sand, wet shoes and the occasional washing machine leak. A durable porcelain tile in these spots protects the floor in the rest of the house.

Replacing worn-out tile

Many older Tampa Bay homes have ceramic tile floors that are cracked, hollow or simply dated. We remove the old tile and its mortar bed, prepare the slab, and install new tile, or a different floor entirely if that suits the room better.

Detail of blue herringbone tile set in a shower
Installation

Flat slab, full coverage, straight lines

Good tile work starts with demolition and preparation. Old tile is removed along with as much of the old thinset as possible, and the slab is ground and leveled until it is flat enough for the tile size you have chosen. Large-format tile in particular needs a very flat surface to avoid lippage and hollow spots.

Where the slab has hairline cracks, we discuss an uncoupling or crack-isolation membrane, which lets the slab move slightly without cracking the tile above it. In showers, a waterproofing system goes behind the tile so water stays where it belongs.

We plan the layout before setting anything: where the pattern starts, how cuts fall at walls and doorways, and how grout lines align with cabinets, tubs and the next room. Each tile is set in mortar with full coverage, spaced evenly, and leveled to its neighbours.

Grout colour is chosen with you, and we leave proper movement joints at the perimeter and where the manufacturer calls for them. Finally, we finish edges with trim or transitions, clean the tile, haul away the debris and talk you through grout care.

Mobile Flooring Store

Tile samples, brought to your door.

Our mobile showroom carries hundreds of samples. Compare them in your own rooms and lighting, get a written estimate on the spot, then one crew handles the install.

Tile

Tile questions

Porcelain or ceramic tile: what is the difference?

Porcelain is denser and absorbs less water, which makes it the better choice for showers, entries and floors that see heavy traffic. Ceramic is softer and usually less expensive, and it is fine for many walls and lighter-use floors. We will tell you which one each room needs.

Can you install tile in a shower?

Yes. We tile shower walls, including patterned layouts such as herringbone. A shower is a wet system, not just tile, so the waterproofing behind the tile matters as much as what you see. We go over the build-up with you at the estimate.

Why do large tiles need such a flat floor?

Large-format tiles are stiff and cannot follow dips in the slab the way small tiles can. If the floor is not flat, edges stick up (called lippage) and tiles can sound hollow or crack. We level the slab before setting large tile so the finished floor is smooth and solid.

Do you fix cracked or loose tiles?

We usually avoid repair projects. Matching an old tile and grout rarely looks right, and it does not address why the tile cracked. If several areas are failing, replacing the floor in that room is often the better investment, and we would be glad to quote it.

Flexible financing available

0% interest for up to 24 months for qualified customers

See financing options

Ready for your free in-home estimate?

Free in-home estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate