Skip to content
Tile, Tampa, FL

Tile in Tampa, FL

Tile is still the most water-proof surface you can put in a Florida bathroom, shower or entry, and porcelain in particular stands up to sand, pool traffic and decades of mopping. We install new porcelain and ceramic floors, shower walls and feature walls, often in the same home where we are pulling up old, cracked tile from a previous owner. We bring tile samples to your home with the rest of the showroom, so you can see colour and size against your own cabinets and light before you commit. Professionally installed across Tampa.

Tile installed in Tampa, FL by BR Flooring
Why BR Flooring in Tampa

Tile done right, the first time, in Tampa.

Homeowners across Tampa, FL call BR Flooring for tile because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install tile across Tampa and the surrounding area, including Temple Terrace, Carrollwood, Town 'n' Country, Lake Magdalene.

Tile in Tampa

Built for Tampa homes.

Tampa is home base. Our Design Center sits at 12919 N Nebraska Ave, and from there we cover a city whose housing runs from the 1920s boom streets of Davis Islands and Bayshore Boulevard to New Tampa, annexed in 1988 and built out since. Almost all of it shares two conditions that shape any flooring project here: a concrete slab underfoot and humid subtropical air for much of the year. That is where flooring in Tampa, FL starts for us.

Tampa grew in waves, and you can read those waves in its floors. In the 1880s Vicente Martinez Ybor moved his cigar factories here from Key West and built hundreds of small houses for his workers around them. The 1920s Florida boom brought the Mediterranean Revival homes of Davis Islands, the Tampa Theatre and Bayshore Boulevard along Hillsborough Bay. Then, starting in 1988, the city annexed about 24 square miles of mostly rural land between I-275 and I-75 that became New Tampa, with its newer subdivisions such as Tampa Palms.

Our Design Center is on North Nebraska Avenue in north Tampa, a short drive from neighbourhoods like Sulphur Springs, whose 214-foot water tower has stood since the late 1920s, and Seminole Heights and Tampa Heights to the south. You are welcome to come in and walk the sample walls. Many customers, though, choose at home: we bring the samples to you, because a plank that looks right under showroom lights can look very different beside your cabinets and your afternoon sun.

Two things are true of nearly every Tampa job. First, the house is usually on a concrete slab, which is why we so often recommend luxury vinyl plank or engineered hardwood rather than solid wood nailed down. Second, Tampa has a humid subtropical climate, with hot, wet summers and frequent afternoon thunderstorms. Flooring that reacts to moisture needs to be acclimated and installed over a properly prepared, moisture-checked slab.

Storms have also changed a lot of floors recently. Hurricane Helene in September 2024 caused the worst storm surge the Tampa Bay area had seen in 100 years, and Hurricane Milton followed that October. In low-lying and waterfront parts of the city, many homeowners replacing floors now ask for waterproof-core LVP or tile on the ground floor. No floor makes a house flood-proof, but some recover from water far better than others, and we will talk through those options honestly.

In older parts of the city, the job often starts with demolition: ceramic tile laid by a previous owner, carpet over a slab with years of glue, sometimes more than one floor stacked on top of another. We take it out, grind and level the slab, and install the new floor with the stairs and trim in the same project.

Tampa FAQs

Tile in Tampa, questions

Can I visit your Design Center in Tampa?

Yes. The Design Center is at 12919 N Nebraska Ave, Tampa, FL 33612, open Monday to Friday 9am to 5pm and Saturday 9am to 1pm. If it is easier, we bring the samples to your home for a free in-home estimate instead. Call (813) 647-0405 to set a time.

Our South Tampa home took water in the 2024 storms. What floor should we put back?

For ground-floor rooms in flood-prone areas, we usually suggest a waterproof-core luxury vinyl plank or porcelain tile. Neither makes a home flood-proof, but both tolerate water far better than laminate, carpet or solid wood. Before anything goes down, the slab has to be fully dry, and we check it.

Is solid hardwood a bad idea on a Tampa slab?

Solid hardwood is not designed to be nailed into concrete, and it reacts to moisture by cupping. On a slab we normally recommend engineered hardwood, glued down or floated with a moisture barrier, or a wood-look LVP. Over a wood subfloor, such as an upstairs room, solid hardwood can work.

Porcelain or ceramic tile: what is the difference?

Porcelain is denser and absorbs less water, which makes it the better choice for showers, entries and floors that see heavy traffic. Ceramic is softer and usually less expensive, and it is fine for many walls and lighter-use floors. We will tell you which one each room needs.

Can you install tile in a shower?

Yes. We tile shower walls, including patterned layouts such as herringbone. A shower is a wet system, not just tile, so the waterproofing behind the tile matters as much as what you see. We go over the build-up with you at the estimate.

Why do large tiles need such a flat floor?

Large-format tiles are stiff and cannot follow dips in the slab the way small tiles can. If the floor is not flat, edges stick up (called lippage) and tiles can sound hollow or crack. We level the slab before setting large tile so the finished floor is smooth and solid.

Flexible financing available

0% interest for up to 24 months for qualified customers

See financing options

Ready to start your Tampa project?

Free in-home estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate