Skip to content
Stairs & trim

Stairs & trim

A staircase is often the first thing people see when they walk in, and it is where a flooring job either looks finished or looks unfinished. Our stairs & trim work covers new hardwood or LVP treads, painted risers, nosing that matches the floor, iron baluster upgrades, and the baseboard, quarter round and transitions that tie every room together. Staircases are some of our favourite projects: carpeted stairs turned into oak treads with crisp white risers and black iron balusters can change the whole feel of a house.

Wood flooring in a hallway leading to matching wood stair treads
The finishing work

Where a flooring job looks finished or doesn't

Why stairs deserve their own plan

Stairs take more wear than any other part of the floor, and they sit right in the line of sight from the front door. A beautiful new LVP or hardwood floor that runs up to a worn, carpeted staircase can make the whole job look half done.

Planning stairs and floors together means the tread colour, the nosing profile and the trim all line up. It also means the work happens in one visit by one crew, instead of a flooring company and a carpenter blaming each other for the gap where they meet.

Trim is not an afterthought

Baseboard, quarter round, shoe molding and transition strips cover the expansion gap that a floating floor needs, hide the edges of the cut, and smooth the change from one floor to the next. Cheap or rushed trim is the first thing an eye catches. We treat it as part of the floor, not as a separate job.

What we do

Stairs and trim projects we take on

Carpet-to-wood staircase conversions

Removing tired stair carpet and installing new treads and risers is the classic stair makeover. Oak treads with painted white risers are a timeless look; a tread that matches your new LVP gives a seamless one.

Iron baluster upgrades

Swapping old wooden spindles for iron balusters modernises a staircase at a reasonable cost. Paired with new treads and painted risers, it can make a builder-grade staircase look custom.

Stair nosing for LVP and laminate

When a floating floor continues up the stairs, each step needs a matching nosing to protect the edge and look finished. We fit and secure the nosing so it is solid underfoot.

Baseboard, quarter round and transitions

Every floor we install needs a finished edge. We install new baseboard or quarter round, and we fit transitions at doorways, at sliding doors and where the floor meets tile or carpet, keeping height changes as low as possible.

Swapping old wooden spindles for iron balusters modernises a staircase at a reasonable cost.
Staircase with light oak treads, white risers and black iron balusters
Recent installs

Stairs & trim we've installed

  • Oak stair treads with bullnose edges and white risers
  • Curved staircase with grey wood-look treads and white risers
  • Stairs with new wood treads, white risers and wrought-iron balusters
  • Staircase with dark espresso treads, white risers and iron balusters
  • Looking down a staircase with dark wood treads
  • Two-flight staircase with oak treads and matching landing flooring
How we build stairs

Square, solid and quiet underfoot

Stair work starts with removal. We take off the carpet, pad, tack strip and staples, and assess the existing treads and stringers. On many staircases the old bullnose overhang has to be cut back so the new tread sits flat and the nosing projects correctly.

Every step is measured individually, because few staircases are perfectly square. Treads are cut to fit their own opening, then glued and fastened so they do not creak. Risers are installed and painted, or pre-finished, depending on the look you chose.

If balusters are being replaced, the old spindles are removed and the new iron balusters are set and secured into the treads and the handrail, then aligned so the spacing is even from top to bottom.

Throughout the house, trim is installed after the floor: baseboard or quarter round scribed to the wall, mitred at the corners, and nailed and caulked so the joints stay closed. Transitions are fitted last. Then we clean up, haul the debris away and walk the stairs with you.

Overhead view of a staircase with new oak treads and iron railing
Mobile Flooring Store

Stairs & trim samples, brought to your door.

Our mobile showroom carries hundreds of samples. Compare them in your own rooms and lighting, get a written estimate on the spot, then one crew handles the install.

Stairs & trim

Stairs & trim questions

Can you replace carpeted stairs with wood treads?

Yes. This is one of the most popular stair upgrades. We remove the carpet, pad and tack strip, cut back or remove the old nosing as needed, and install new treads, typically oak or a matching LVP tread, with new risers. The result is a staircase that matches your new floor.

Can you swap my wooden balusters for iron?

Yes. Iron balusters are one of the most visible upgrades you can make to a staircase. We can install them as part of a stair makeover, and we will show you the styles available at your estimate.

Why does a new floor need new baseboard or quarter round?

Floating floors need an expansion gap at the walls, and removing the old floor often damages the existing baseboard. New baseboard or quarter round covers that gap and gives the room a clean, finished edge. We include trim in our quotes so it is not an afterthought.

Will my stairs match my new floor?

That is the goal. We plan the stairs with the floor, choosing treads and nosing that match or deliberately complement the floor colour, so the staircase looks like part of the same project.

Flexible financing available

0% interest for up to 24 months for qualified customers

See financing options

Ready for your free in-home estimate?

Free in-home estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate